BV200H-D – Hooded & Ducted A2 Spray Booth
£1,050.00 inc VAT
Production lead time: 4-5 weeks.
Orders placed after the 19th of November are not guaranteed for Christmas delivery.
Buyers outside of the UK are responsible for any VAT, tariff, duty, taxes, handling fees, customs clearance charges, and other fees required by their country for importing consumer goods. For more details please visit our delivery information page
- Additional information
Art No: BV200H -D – Hooded & Ducted A2 Spray Booth
The BenchVent BV200H-D A2 ducted hood mounted extraction cabinet is a general purpose workstation for light aerosol spray and airbrush use. It is designed to capture dust and eliminate fumes/vapours for a safer working environment that meets the CoSHH regulations.
What’s included in the BV200H-D?
- Filter unit with fan(s)
- Hood Enclosure
- 1 x Particulate filter
- Power Lead
- Data/Warranty Booklet
Download the datasheet for more information: BV200H-D Datasheet
Application includes filtration of:
- Aerosol adhesives (glue booth for Spray Mount)
- Aerosol lacquers and fixatives
- Airbrush sprays applied to artwork up to A1 size. A2 or A1 drawing boards can be placed into the hoods at an angle for efficient overspray capture.
The workstation hood also accommodates prototypes, models, ceramic parts, PCB’s etc, placed onto the hood base to be sprayed, soldered, cleaned, glued, moulded or sanded etc.
These cabinets are designed for studio / classroom / workshop cleanliness and for immediate operator protection whereby ‘large’ particulates (> 5 microns) are filtered out and ‘fine’ particulates (<5 microns) together with odours, gases, vapours and fumes within the hood enclosure are exhausted to atmosphere via the flexi-duct.
- 355m³/hr air volume suitable for a wide range of extraction applications
- Built with a centrifugal blower via a three stage graduated fibre particulate filter complete with a high particle holding capacity, ensuring long filter life
- Carry handle to aid with portability
Why choose this A2 Hood Mounted Portable Fume Extraction Cabinet?
All BenchVent filtration and extraction systems carry a lifetime guarantee, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on. For artwork applications, standard A2 drawing boards can be placed within the hood enclosure.
The boards fit at an angle for efficient over-spray capture. 3D items, models, printed circuit boards etc. may be placed onto the hood base for spraying, cleaning, sanding, gluing etc. The Flexi-duct can be fixed to a standard domestic vent or simply placed through a partially open window to facilitate portability or convenience.
How does the filter system work?
The particulate (intake) filter is a three stage graduated fibre filter with a high ‘dust’ holding capacity for long life. Filtration to approx. 5 micron particles. NB: Spray particulate sizes vary from 10 to 20 microns. The dual process of filtration and then extraction to atmosphere via flexi-duct, vastly reduces and/or eliminates operator exposures to potentially hazardous substances.
Demonstrating adequate control of the risks to the health of employees students and the general public, from dusts, powders, mists, fumes and vapours is the fundamental requirement of the Control of Substances Hazardous to Health (CoSHH). For LEV information for employers visit the HSE website.
670x525x450 (wxhxd) [internal] 680x600x450 (wxhxd) [overall]
Steel construction finished in grey – fan/filter unit mounted onto hood enclosure – particulate filter – centrifugal blower – external rotor motor type, brushless, UL, VDE and CSA approved -sealed electrical wiring and switch, downstream of filter. Flexi-duct 2 metres x 100mm dia.
|Air Volume at Free Air||
|Ave. Air Velocity at Filter Face||
|Ave. Air Velocity at Hood Face||
|Fan Motor Spec||
230V, 50Hz, 105W, 115V 60 Hz 115W
Particle Filter: IFA3
|Noise Level LAeq dB(A)||