-12%

BV2TIP – Solder Fume Extractor (up to 2 tips)

£496.02

£595.22 inc VAT

Contact us for the delivery lead time 01423 790039 or email us 

SKU: BV2tiP

Buyers outside of the UK are responsible for any VAT, tariff, duty, taxes, handling fees, customs clearance charges, and other fees required by their country for importing consumer goods. For more details please visit our delivery information page

Description

Part No: BV2tiP – BV2tiP – Solder Fume Extractor – Soldering tips, up to 2 tips

The BV2tiP solder fume extractor is an analogue unit with the same build and functionality of Purex digital fume extractors, just without the digital display. It is an economical choice for tight budget and cheap to run.

Included as standard:

  • 1x Main filter – HEPA/Chemical (code: 110507)
  • 1x Pre-filter – F5 Pad (code: 200036)
  • Connection kit which includes:
    • 2 x tip extraction tubes
      1 x 4m x 5.5mmID x 1.5mm wall clear silicone hose
      2 x screw in adaptor (8mm hose, M10)
      1 x 0.07m x 32mm pipe connector
      1 x 1.5m x 41mm flexible hose
      2 x hose clips

Key Features

  • Run LED – signals when the machine is on
  • Adjustable airflow
  • Low capital and running costs
  • Submicronic (HEPA) filtration removes 99.997% of particles down to 0.3 microns
  • Activated carbon filtration removes harmful gas and odours
  • Simple to install and quiet in operation at <60Db
  • Easy to relocate, only 12kg
  • Precision made from Stainless steel

Specifications:

  • Cabinet Height: 275 mm
  • Cabinet Width: 286 mm
  • Cabinet Depth: 291 mm
  • Cabinet Weight: 12 kg
  • 230v – Wattage: 0.14 kW
  • Frequency: 50 Hz/60 Hz

How are soldering fumes filtered and extracted?

The particulate (intake) filter is a 99.997% HEPA filter which provides capture of dangerous gases and particulates that come from the soldering process. The intake filter has impressive gas filtration via deep, granulated activated carbon impregnated into the gas filter. The unit also benefits from a blocked filter indicator to facilitate correct filter change times to maintain efficient filtration and optimal performance. Through the process of filtration, adsorption and dilution, operator exposure to potentially hazardous soldering fumes and substances is vastly reduced or eliminated to HSE and CoSHH standards.

These units are designed for immediate operator protection from concentrations of airborne contaminants whereby all gases, fumes, vapours and particulates on top of the unit are drawn into the intake filter. Cleaned air is exhausted to the base of the unit. Higher grade filters are available on request.

Demonstrating adequate control of the risks to the health of employees students and the general public, from dusts, powders, mists, fumes and vapours is the fundamental requirement of the Control of Substances Hazardous to Health (CoSHH). For LEV information for employers visit the HSE website.

Additional information

Weight 33 kg
Voltage

230V 50Hz

Dimensions

346mm (H) x 286mm (W) x 291mm (D)

Airflow

170m3/hr

Hose Length

1.5m

Hose Diameter

41mm

Weigth

12kgs